Description
SMWA multipla mulcher 100-155 HP*
Combined mulchers reach working widths of as much as 5 m [200″]. This is ideal for large areas such as parks, airports, or uncultivated land. Three independent mulchers, trailed on a chassis, perfectly follow the contours of the ground. The width and the strength of these large mulchers make it possible to mulch at a high speed, while leaving a clean result.
The SMWA multipla comes with adjustable height control, even while the machine is working. All the settings are adjustable by remote control.
Combined machines like the SMWA multipla are made of 3 single units, liftable for transport and parking. With the STOPSAFE (TM) system it is possible to work with one or both wing units lifted, e.g. when working on narrow areas. The central mulcher has a 3-point linkage and can be used independently.
STANDARD VERSION
- mulches grass and prunings up to 5 cm [2“] Ø
- working speed 3-5 km/h
- composition of the machine:
cart with one central machine and
two on the sides central machine,
for independant use with: SMWA rev cf - 1000 rpm trasmission
- input shaft 1 3/8” Z=6
- number belts: 3 x 4
- adjustable rear hood
- functions of the hydraulic system with
solenoid valves and remote control:
(1) lifting the central, left and right machine
(2) adjusting the height of cut - required hydraulic connections: 1 double acting
- front protection with metal flaps (181) or rubber flap (025)
- rear protection: rubber flap
- standard flails: SMW (OPT 039)
OPTIONS
- PTO shaft (for 1 3/8” Z=6)
- STOPSAFE (TM) automatic clutch to stop the rotor
when one mower is lifted from the ground - rear lamp kit with anti-collison bar
- chevrons for transportation on public roads
* The indicated kW and HP refer to the power required at the PTO output shaft, not to the nominal tractor power.
