Wheel Loaders 2019

The GIANT V452T is part of the comfortable D-Series range – characterized by its 4 cylinder engine, 2 gears and heavy planetary end-drive. Heavy attachments can be easily navigated with the hydraulic functions on the lifting arm. As standard model this GIANT is equipped with a ROPS and FOPS approved safety roof. This approval is required when using attachment, with the risk of falling objects.


  • Hitch: GIANT Compact SK (Mechanically)
  • Double acting hydraulic valve on lifting arm (33 ltr/min)
  • Parallel guidance on lifting arm
  • Counterweight integrated into the mudguard
  • Adjustable in height and sprung driver’s plateau
  • Hand throttle
  • Oil cooler
  • Lifting eyes
Engine Kubota V1505-T (4 cylinder)
Engine power 45 hp / 33 kW
Fuel Diesel
Service weight - Measured with earthbucket 2,400 kg
Lifting capacity 1,750 kg
Tipping load - Measured on hinge point in straight position on standard tires 2,050 kg
Lifting height - Measured on hinge point in straight position on standard tires 2,964 mm
Length without bucket 3,247 mm
Width on standard tires 1,100 mm
Driving mechanism Hydrostatic 4 wheel drive with automotive control with 8 tons axles. Planetairy end drive.
Control Drive back and forward through electrical switch
Differential lock Automatic differential lock on both axles
Driving hydraulics 84 ltr/min (350 bar)
Working hydraulics 51 ltr/min (210 bar)
Driving speed 0-10 km/h, 0-20 km/h
Parking brake Drum brakes
Colour GIANT yellow / GIANT grey / black
A Wheelbase 1,643 mm
B Total length (without bucket) 3,247 mm
C Total length (with bucket) 4,015 mm
D Length 3-point lifting arm 540 mm
E Min. height 3-point hitch 253 mm
F Max. height 3-point hitch 652 mm
G Seat top height 1,341 mm
H Max. height with ROPS/FOPS safetyroof 2,322 mm
I Max. height with ROPS/FOPS cabin 2,345 mm
J Height frontframe 1,731 mm
K Dumping height 2,144 mm
L Max. height pivot 2,964 mm
M Max. height with bucket 3,532 mm
N Rollback angle (on the ground) 43°
O Rollback angle at max. lifting height 45°
P Dumping angle (max.) 43°
Q Loading angle (max.) 28°
R Diameter standard tire ø850 mm
1A Maximum radius external 2,972 mm
1B Radius at the outer edge 2,560 mm
1C Inside turning radius 1,460 mm
1D Min. machine width 1,100 mm

Contact Information

44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
01667 462 608

Message to FFE

Error: Contact form not found.