Wheel Loaders 2019

With a tipping load of 2,600 kg the GIANT V452T X-TRA is a real ‘powerhouse’. Due to its extra low front frame, this GIANT can lift significantly more weight in comparison with the GIANT V452T. As standard model the GIANTs from the D-Series range are equipped with an automatic differential lock on both axles, preventing the machine from losing grip – even on loose sand.


  • Hitch: GIANT Compact SK (Mechanically)
  • Double acting hydraulic valve on lifting arm (33 ltr/min)
  • Parallel guidance on lifting arm
  • Counterweight integrated into the mudguard
  • Adjustable in height and sprung driver’s plateau
  • Hand throttle
  • Oil cooler
  • Lifting eyes
Engine Kubota V1505-T (4 cylinder)
Engine power 45 hp / 33 kW
Fuel Diesel
Service weight - Measured with earthbucket 2,400 kg
Lifting capacity 2,200 kg
Tipping load - Measured on hinge point in straight position on standard tires 2,600 kg
Lifting height - Measured on hinge point in straight position on standard tires 2,498 mm
Length without bucket 3,316 mm
Width on standard tires 1,100 mm
Driving mechanism Hydrostatic 4 wheel drive with automotive control with 8 tons axles. Planetairy end drive.
Control Drive back and forward through electrical switch
Differential lock Automatic differential lock on both axles
Driving hydraulics 84 ltr/min (350 bar)
Working hydraulics 51 ltr/min (210 bar)
Driving speed 0-10 km/h, 0-20 km/h
Parking brake Drum brakes
Colour GIANT yellow / GIANT grey / black
A Wheelbase 1,695 mm
B Total length (without bucket) 3,316 mm
C Total length (with bucket) 4,085 mm
D Length 3-point lifting arm 540 mm
E Min. height 3-point hitch 253 mm
F Max. height 3-point hitch 652 mm
G Seat top height 1,341 mm
H Max. height with ROPS/FOPS safetyroof 2,322 mm
I Max. height with ROPS/FOPS cabin 2,345 mm
J Height frontframe 1,492 mm
K Dumping height 1,735 mm
L Max. height pivot 2,498 mm
M Max. height with bucket 3,070 mm
N Rollback angle (on the ground) 42°
O Rollback angle at max. lifting height 47°
P Dumping angle (max.) 37°
Q Loading angle (max.) 28°
R Diameter standard tire ø850 mm
1A Maximum radius external 3,045 mm
1B Radius at the outer edge 2,623 mm
1C Inside turning radius 1,523 mm
1D Min. machine width 1,100 mm

Contact Information

44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
01667 462 608

Message to FFE

Error: Contact form not found.