Wheel Loaders 2019

The HD-Series range is an abbreviation for Heavy Duty, representing 12-tonnes axles and a bigger gear pump, and is characterized by a driving speed of 28 km/h with an increasing pulling force. The X-TRA-Series range is known for its high tipping load, due to its extra low front frame. As standard model this machine is additionally equipped with a self-locking differential on both axles.


  • Hitch: GIANT Standard (Hydraulically)
  • ROPS / FOPS safety roof, incl. safety doors left and right
  • Double acting hydraulic valve at the front (mechanical)
  • Hydraulic servicebreak on 4 wheels
  • Floating position on lifting cylinder(s)
  • Luxury seat with safety belt, armrest and extended backrest
  • Main switch
  • Towing hook at the back
  • 1 Counterweight integrated into the bumper
  • Working light on lifting arm
  • Cyclone filter
  • Oil cooler
Engine Kubota V1505-T (4 cylinder)
Engine power 45 hp / 33 kW
Fuel Diesel
Service weight - Measured with earthbucket 2,770 kg
Lifting capacity 2,250 kg
Tipping load - Measured on hinge point in straight position on standard tires 2,700 kg
Lifting height - Measured on hinge point in straight position on standard tires 2,948 mm
Length without bucket 3,316 mm
Width on standard tires 1,100 mm
Driving mechanism Hydrostatic 4 wheel drive with automotive control with 8 tons axles. Planetairy end drive.
Control Drive back and forward through electrical switch
Differential lock Automatic differential lock on both axles
Driving hydraulics 84 ltr/min (460 bar)
Working hydraulics 51 ltr/min (210 bar)
Driving speed 0-10 km/h, 0-28 km/h (with automatic gear)
Parking brake Drum brakes
Colour GIANT yellow / GIANT grey / black
A Wheelbase 1,695 mm
B Total length (without bucket) 3,316 mm
C Total length (with bucket) 4,085 mm
D Length 3-point lifting arm 540 mm
E Min. height 3-point hitch 253 mm
F Max. height 3-point hitch 652 mm
G Seat top height 1,341 mm
H Max. height with ROPS/FOPS safetyroof 2,322 mm
I Max. height with ROPS/FOPS cabin 2,345 mm
J Height frontframe 1,492 mm
K Dumping height 2,735 mm
L Max. height pivot 2,498 mm
M Max. height with bucket 3,070 mm
N Rollback angle (on the ground) 42°
O Rollback angle at max. lifting height 47°
P Dumping angle (max.) 37°
Q Loading angle (max.) 28°
R Diameter standard tire ø850 mm
1A Maximum radius external 3,045 mm
1B Radius at the outer edge 2,623 mm
1C Inside turning radius 1,523 mm
1D Min. machine width 1,100 mm

Contact Information

44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
01667 462 608

Message to FFE

Error: Contact form not found.