GIANT V362

Wheel Loaders 2019

Equipped with a 36 hp engine the GIANT V362 is the so-called ‘Lightweight’ of the D-Series range. This articulated wheel loader is exclusively constructed with axel shafts, enabling a driving speed of 18 km/h with one gear. As standard model this GIANT is equipped with an automatic differential lock.

EXTRA FEATURES

  • Hitch: GIANT Compact SK (Mechanically)
  • Double acting hydraulic valve on lifting arm (33 ltr/min)
  • Parallel guidance on lifting arm
  • Counterweight integrated into the mudguard
  • Adjustable in height and sprung driver’s plateau
  • Hand throttle
  • Oil cooler
  • Lifting eyes
Engine
Engine Kubota V1505 (4 cylinder),
Engine power 36 hp / 26 kW
Fuel Diesel
Service weight - Measured with earthbucket 2,350 kg
Lifting capacity 1,750 kg
Tipping load - Measured on hinge point in straight position on standard tires 2,000 kg
Lifting height - Measured on hinge point in straight position on standard tires 2,919 mm
Length without bucket 3,247 mm
Width on standard tires 1,080 mm
Driving mechanism Hydrostatic 4 wheel drive with automotive control with axles
Control Drive back and forward through electrical switch
Differential lock Automatic differential lock on both axles
Driving hydraulics 135 ltr/min (350 bar)
Working hydraulics 45 ltr/min (170 bar)
Driving speed 0-18 km/h
Parking brake Drum brakes
Colour GIANT yellow / GIANT grey / black
A Wheelbase 1,643 mm
B Total length (without bucket) 3,247 mm
C Total length (with bucket) 4,015 mm
D Length 3-point lifting arm 540 mm
E Min. height 3-point hitch 253 mm
F Max. height 3-point hitch 652 mm
G Seat top height 1,136 mm
H Max. height with ROPS/FOPS safetyroof 2,277 mm
I Max. height with ROPS/FOPS cabin 2,300 mm
J Height frontframe 1,686 mm
K Dumping height 2,099 mm
L Max. height pivot 2,919 mm
M Max. height with bucket 3,487 mm
N Rollback angle (on the ground) 43°
O Rollback angle at max. lifting height 45°
P Dumping angle (max.) 43°
Q Loading angle (max.) 28°
R Diameter standard tire ø760 mm
1A Maximum radius external 2,972 mm
1B Radius at the outer edge 2,560 mm
1C Inside turning radius 1,460 mm
1D Min. machine width 1,070 mm

Contact Information

44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
PHONE:
01667 462 608

Message to FFE

Error: Contact form not found.