GIANT D337T

Wheel Loaders 2019

The GIANT D337T is part of the C-Series range. A combination of mechanically driven heavy axles shafts and an automatic differential lock result in converting the GIANT’s power to push force. Hence, the GIANT is equipped with a Bosch Rexroth automotive hydraulic pump, which contributes to an extremely smooth and powerful ride.

EXTRA FEATURES

  • Hitch: GIANT Compact SK (Mechanically)
  • Double acting hydraulic valve on lifting arm (33 ltr/min)
  • Parallel guidance on lifting arm
  • Counterweight integrated into the mudguard
  • Adjustable in height and sprung driver’s plateau
  • Hand throttle
  • Oil cooler
  • Lifting eyes
Engine
Engine Kubota D1105-T (3 cylinder),
Engine power 33 hp / 24 kW
Fuel Diesel
Service weight - Measured with earthbucket 2,100 kg
Lifting capacity 1,650 kg
Tipping load - Measured on hinge point in straight position on standard tires 1,450 kg
Lifting height - Measured on hinge point in straight position on standard tires 2,825 mm
Length without bucket 2,975 mm
Width on standard tires 1,080 mm
Driving mechanism Hydrostatic 4 wheel drive with automotive control with axles
Control Drive back and forward through electrical switch
Differential lock Axles with limited slip on both axles
Driving hydraulics 135 ltr/min (350 bar)
Working hydraulics 45 ltr/min (170 bar)
Driving speed 0-18 km/h
Parking brake Drum brakes
Colour GIANT yellow / GIANT grey / black
A Wheelbase 1,515 mm
B Total length (without bucket) 2,975 mm
C Total length (with bucket) 3,690 mm
D Length 3-point lifting arm 622 mm
E Min. height 3-point hitch 134 mm
F Max. height 3-point hitch 797 mm
G Seat top height 1,256 mm
H Max. height with ROPS/FOPS safetyroof 2,300 mm
I Max. height with ROPS/FOPS cabin 2,284 mm
J Height frontframe 1,480 mm
K Dumping height 1,988 mm
L Max. height pivot 2,825 mm
M Max. height with bucket 3,392 mm
N Rollback angle (on the ground) 43°
O Rollback angle at max. lifting height 53°
P Dumping angle (max.) 47°
Q Loading angle (max.) 29°
R Diameter standard tire ø760 mm
1A Maximum radius external 2,599 mm
1B Radius at the outer edge 2,292 mm
1C Inside turning radius 1,179 mm
1D Min. machine width 1,040 mm

Contact Information

44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
PHONE:
01667 462 608

Message to FFE

Error: Contact form not found.