GIANT D337T X-TRA

Wheel Loaders 2019

Besides the standard GIANT D337, this model will now be available in the X-TRA version as well. The D337T X-TRA has a lower front frame and thus a lower centre of gravity. Resulting in excellence on the attachments and stability of the machine, as well as the biggest advantage of an increased lifting capacity. A D337T X-TRA has a tipping load of 2.054 kg in comparison with 1.450 kg for the standard model.

EXTRA FEATURES

  • Hitch: GIANT Compact SK (Mechanically)
  • Double acting hydraulic valve on lifting arm (33 ltr/min)
  • Parallel guidance on lifting arm
  • Counterweight integrated into the mudguard
  • Adjustable in height and sprung driver’s plateau
  • Hand throttle
  • Oil cooler
  • Lifting eyes
Engine
Engine Kubota D1105-T (3 cylinder),
Engine power 33 HP / 24 kW
Fuel Diesel
Service weight - Measured with earthbucket 2,200 kg
Lifting capacity 2,20 kg
Tipping load - Measured on hinge point in straight position on standard tires 2,054 kg
Lifting height - Measured on hinge point in straight position on standard tires 2,450 mm
Length without bucket 3,054 mm
Width on standard tires 1,080 mm
Driving mechanism Hydrostatic 4 wheel drive with automotive control with axles
Control Drive back and forward through electrical switch
Differential lock Axles with limited slip on both axles
Driving hydraulics 135 ltr/min (350 bar)
Working hydraulics 45 ltr/min (170 bar)
Driving speed 0-18 km/h
Parking brake Drum brakes
Colour GIANT yellow / GIANT grey / black
A Wheelbase 1,580 mm
B Total length (without bucket) 3,054 mm
C Total length (with bucket) 3,830 mm
D Length 3-point lifting arm 622 mm
E Min. height 3-point hitch 134 mm
F Max. height 3-point hitch 797 mm
G Seat top height 1,256 mm
H Max. height with ROPS/FOPS safetyroof 2,300 mm
I Max. height with ROPS/FOPS cabin 2,284 mm
J Height frontframe 1,250 mm
K Dumping height 1,680 mm
L Max. height pivot 2,450 mm
M Max. height with bucket 3,040 mm
N Rollback angle (on the ground) 41°
O Rollback angle at max. lifting height 46°
P Dumping angle (max.) 47°
Q Loading angle (max.) 29°
R Diameter standard tire ø760 mm
1A Maximum radius external 2,650 mm
1B Radius at the outer edge 2,342 mm
1C Inside turning radius 1,230 mm
1D Min. machine width 1,080 mm

Contact Information

44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
PHONE:
01667 462 608

Message to FFE

Error: Contact form not found.