Are you looking for a compact yet powerful machine? Well, you might have found what you are looking for; the GIANT D332SWT X-TRA. The X-TRA Series range are characterized by their extra low front frame and thus a lower centre of gravity of the load in comparison to the machine, resulting in a significantly higher tipping load. An additional advantage is the driver’s excellent view on his/her work which improves work safety.
Service
Service
44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
View on map
GIANT D332SWT X-TRA
Wheel Loaders 2019
EXTRA FEATURES
- Hitch: GIANT Compact SK (Mechanically)
- Double acting hydraulic valve on lifting arm (33 ltr/min)
- Parallel guidance on lifting arm
- Counterweight integrated into the mudguard
- Adjustable in height and sprung driver’s plateau
- Hand throttle
- Oil cooler
- Lifting eyes
Engine
| Engine | Kubota D1105-T (3 cylinder), |
| Engine power | 33 HP / 24 kW |
| Fuel | Diesel |
| Service weight - Measured with earthbucket | 1,550 kg |
| Lifting capacity | 1,400 kg |
| Tipping load - Measured on hinge point in straight position on standard tires | 1,663 kg |
| Lifting height - Measured on hinge point in straight position on standard tires | 2,067 mm |
| Length without bucket | 2,718 mm |
| Width on standard tires | 1,100 mm |
| Driving mechanism | Hydrostatic 4 wheel drive with automotive control by 4 heavy Poclain wheel engines |
| Control | Drive back and forward through electrical switch |
| Differential lock | Electric controlled length differential lock |
| Driving hydraulics | 84 ltr/min (350 bar) |
| Working hydraulics | 42 ltr/min (170 bar) |
| Driving speed | 0-12 km/h (option: 0-19 km/u) |
| Parking brake | Hydraulic multidisk brake |
| Colour | GIANT yellow / GIANT grey / black |
| A Wheelbase | 1,419 mm |
| B Total length (without bucket) | 2,718 mm |
| C Total length (with bucket) | 3,389 mm |
| D Length 3-point lifting arm | 622 mm |
| E Min. height 3-point hitch | 74 mm |
| F Max. height 3-point hitch | 737 mm |
| G Seat top height | 1,136 mm |
| H Max. height with ROPS/FOPS safetyroof | 2,230 mm |
| I Max. height with ROPS/FOPS cabin | 2,220 mm |
| J Height frontframe | 1,148 mm |
| K Dumping height | 1,360 mm |
| L Max. height pivot | 2,067 mm |
| M Max. height with bucket | 2,641 mm |
| N Rollback angle (on the ground) | 44° |
| O Rollback angle at max. lifting height | 55° |
| P Dumping angle (max.) | 41° |
| Q Loading angle (max.) | 27° |
| R Diameter standard tire | ø670 mm |
| 1A Maximum radius external | 2,469 mm |
| 1B Radius at the outer edge | 2,263 mm |
| 1C Inside turning radius | 1,163 mm |
| 1D Min. machine width | 1,100 mm |