The GIANT D263S is an articulated wheel loader known for its compact construction and manoeuvrability, and can be used for all kinds of odd jobs. The carefully chosen components make this machine extremely reliable, which, in addition, is equipped with a ROPS/FOPS approved safety roof.most lift its own weight!
Service
Service
44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
View on map
GIANT D332ST
Wheel Loaders 2019
EXTRA FEATURES
- Hitch: GIANT Compact SK (Mechanically)
- Double acting hydraulic valve on lifting arm (33 ltr/min)
- Parallel guidance on lifting arm
- Counterweight integrated into the mudguard
- Adjustable in height and sprung driver’s plateau
- Hand throttle
- Oil cooler
- Lifting eyes
Engine
| Engine | Kubota D1105-T (3 cylinder), |
| Engine power | 33 HP / 24 kW |
| Fuel | Diesel |
| Service weight - Measured with earthbucket | 1,500 kg |
| Lifting capacity | 1,100 kg |
| Tipping load - Measured on hinge point in straight position on standard tires | 1,060 kg |
| Lifting height - Measured on hinge point in straight position on standard tires | 2,558 mm |
| Length without bucket | 2,669 mm |
| Width on standard tires | 890 mm |
| Driving mechanism | Hydrostatic 4 wheel drive with automotive control with axles and drive engines |
| Control | Drive back- and forward through electrical switch |
| Driving hydraulics | 84 ltr/min (300 bar) |
| Working hydraulics | 42 ltr/min (150 bar) |
| Driving speed | 0-12 km/h |
| Parking brake | Drum brakes |
| Colour | GIANT yellow / GIANT grey / black |
| A Wheelbase | 1,368 mm |
| B Total length (without bucket) | 2,669 mm |
| C Total length (with bucket) | 3,360 mm |
| D Length 3-point lifting arm | 622 mm |
| E Min. height 3-point hitch | 74 mm |
| F Max. height 3-point hitch | 737 mm |
| G Seat top height | 1,136 mm |
| H Max. height with ROPS/FOPS safetyroof | 2,165 mm |
| I Max. height with ROPS/FOPS cabin | -- |
| J Height frontframe | 1,535 mm |
| K Dumping height | 1,827 mm |
| L Max. height pivot | 2,558 mm |
| M Max. height with bucket | 3,138 mm |
| N Rollback angle (on the ground) | 41° |
| O Rollback angle at max. lifting height | 52° |
| P Dumping angle (max.) | 44° |
| Q Loading angle (max.) | 27° |
| R Diameter standard tire | ø670 mm |
| 1A Maximum radius external | 2,257 mm |
| 1B Radius at the outer edge | 1,900 mm |
| 1C Inside turning radius | 1,040 mm |
| 1D Min. machine width | 890 mm |