Description
SMG flail mulcher 70-160 HP*
A dream of a mulcher: large areas in short time.
The SMG multipla consists of two side mulchers, mounted on a central hitch. Both machines have angling from +90° to -60°, even while working. With a third mower mounted either on the 3-point linkage or on the front of the tractor, the working width can be as much as 7 m [276“]. Make your machine park complete with a SMG multipla!
The SMG multipla, made of two separate wing mulchers linked to a central 3-point linkage, will angle from +90° to -60°. For transport and parking, the machines can be lifted. In combination with an OLS fh mulcher, the SMG multipla is ideal for maintaining large areas.
STANDARD VERSION
- mulches grass and prunings up to 8 cm [3,15“] Ø
- working speed 3-7 km/h
- cat. 2 ISO 3-point linkage
- composition of the machine: two wing mowers to be used in conjunction with central mower
- recommended central mower, for independant use: OLS fh 275
- 1000 rpm trasmission with through shaft
- input shaft 1 3/4” Z=6
- number belts: 2 x 4
- adjustable rear hood with rubber protection
- functions of the hydraulic system with solenoid valves and remote control:
(1) lifting the central, left and right machine
(2) parking hitch - required hydraulic connections: 3 double acting
- front protection: chains
- standard rotor with flails up to L=625: SMO, L=675: SMW
OPTIONS
- PTO drive shaft with freewheel
- 540 rpm gearbox
- additional cat. 2 3-point linkage
- reinforced roller
- roller scraper
- accumulator to adapt the contours of the ground
- chevrons
* The indicated kW and HP refer to the power required at the PTO output shaft, not to the nominal tractor power.
